MS140TB-NNV230T635L305 Two-axis, three-light pod

This optoelectronic pod integrates an uncooled infrared thermal imager and a visible light camera to enable round-the-clock detection, identification, and tracking of ground targets. It simultaneously outputs real-time infrared and visible light video for mission personnel to monitor.

The pod has been adapted to several mainstream flight control platforms in China, allowing seamless integration with existing flight control systems. It can also be connected to our organization’s ViewControlStudio display and control software platform, helping the overall unit accelerate the development of UAV systems.

This optoelectronic pod is ideally suited for applications such as reconnaissance, targeting guidance, border patrol, search and rescue operations, and forest fire prevention.

I. Photos of the actual product

Figure 1 Product Image

II. Product Functions

a) Capable of automatically identifying and tracking typical targets.
b) Equipped with self-diagnostic and fault reporting functions.
c) Provides 30× optical zoom for visible light imaging.
d) Supports long-wave uncooled infrared and visible light detection, and can output both infrared and visible light images.
e) Integrated with laser ranging capability.
f) Visible light channel supports optical zoom, autofocus, manual focus, fog penetration, and low-light enhancement.
g) Infrared sensor features 1.0× to 4.0× electronic zoom and six pseudo-color switching modes.
h) Supports two-degree-of-freedom movement (azimuth and pitch).
i) Offers multiple operating modes, including heading lock, manual search, follow-up, attitude stabilization, and tracking.
j) Capable of isolating carrier disturbances and stabilizing the line of sight.
k) Supports target locking/unlocking; when locked, the pod outputs an image with a tracking frame.
l) Features automatic target tracking with resistance to natural interference.
m) Includes memory tracking, allowing rapid target reacquisition after brief loss.
n) Allows adjustment of the tracking gate size.
o) Supports tracking point switching.
p) Can calculate target coordinates using laser ranging, UAV position, and attitude data.
q) Enables bidirectional communication with the control station via serial port or 100 Mbps Ethernet (UDP), and can output system status, camera status, and optical axis position.
r) Equipped with HD-SDI and 100 Mbps Ethernet (RTSP protocol) video interfaces.
s) Supports photo and video recording functions.

III. Mounting Platform

Vertical take-off fixed-wing drones, rotary-wing drones, tethered drones, etc.

IV. Main Technical Parameters

model	S140TA-NNV230T635L305
Infrared thermal imager
Detector type	Uncooled focal plane detector
Lens focal length	35mm
Pseudo-color	6 types
Visible light camera
resolution	1920*1080
Optical zoom	30 times
Electron Magnification	2 times
Focusing method	Autofocus, manual focus
Minimum Illumination	0.01 Lux
Laser rangefinder
wavelength	1535nm
System Indicators
Image tracking	Automatically track selected target
AI recognition	Automatic detection and identification of typical targets
Rated operating voltage	24VDC
Power supply voltage range	20V to 32VDC
volume	140mm x 152mm x 188mm
interface
Control Interface	RS422/100Mbps Ethernet
Video interface	100Mbps Ethernet ( HD-SDI optional)
Image format	JPG format
Video format	AVI format
Environmental adaptability
Vibration conditions	The acceleration is 2g; 30 minutes each in the vertical, horizontal and longitudinal directions.
Impact conditions	Peak acceleration 20g, duration 11ms
Protection level	Can fly in light rain

V. Mechanical Dimensions and Installation Interface Diagram

Figure 2 Product mechanical dimensions diagram